D-Link DIR-410 User Manual page 51

both VPN router and client
8. Remote ID: The Type and the Value are the same as the Type and the Value of the
Local ID of the remote VPN router.
9. Local ID: The Type and the Value are the same as the Type and the Value of the
Remote ID of the remote VPN gateway.
10. Keep Alive: Click "enable" to keep VPN connection alive. Otherwise, if there are no
packets transmitting, the VPN tunnel would disconnect.
11. Xauth: If you click "Xauth". It means that it is without Extended Authentication(xAuth). If
you. However, if you choose "Server", it will verify the legality of user information from
VPN client. The user information that is provided by VPN client needs to match to user
information that is in local user database of VPN server.
12. Set IKE Protocol: Click "enable" to set IKE Protocol. The default value will be used if
this option is disabled.
13. Encryption/Authentication/DH Group: Select appropriate encryption, authentication
and DH Group
3.3.6.3 VPN Dynamic IP Setting
If client side could not receive the fixed IP and need to have connection established, please
configure VPN Dynamic IP Setting. For instance, the business traveler would like to use
laptop to get connected to the company's internal website.
51