Download Print this page

Siemens SIMATIC PG 760 PII Product Information Bulletin page 9

Programming devic
Hide thumbs Also See for SIMATIC PG 760 PII:

Advertisement

Diskette Drive
You can store programs and data on diskettes with the disk drive and load
them from diskettes into the PG 760 PII.
Types of Diskette
You can use the following diskettes:
3.5 in.
1.44 Mbytes (135 TPI)
80 tracks per side
Programming device recognizes diskettes
by their coding
Handling Diskettes
The diskette is inserted in the disk drive as shown below:
Caution
!
Risk of data loss!
You must not remove the diskette as long as the access LED is lit. Otherwise
you might lose the data on the diskette.
Do not remove the diskette until the access LED on the drive of the
PG 760 PII has gone out.
Hard Disk Drive
You can use a number of different hard disk drives in your PG 760 PII. The
memory capacity of the particular type of hard disk can be found in the
Technical Specifications. The hard disk drive is connected to the primary
IDE interface.
Access LED
Whenever the hard disk drive is accessed, its access LED on the front of the
unit lights up.
PG 760 PII Product Information Bulletin
C79000-K7076-C767-01
Double-Sided High-Density Diskette
Access LED
Double-Sided Double-Density Diskette
3.5 in.
720 Kbytes
80 tracks per side
Programming device recognizes diskettes
by their coding
Ejector
7

Advertisement

loading