Download Print this page

Siemens SIMATIC PG 760 PII Product Information Bulletin page 15

Programming devic
Hide thumbs Also See for SIMATIC PG 760 PII:

Advertisement

Notes on the CE Symbol for SIMATIC S5
The following applies to the SIMATIC product described in this manual:
EMC Directive
This product fulfils the requirements for the EC directive 89/336/EEC on
"electromagnetic compatibility" and the following fields of application apply
according to this CE symbol:
Residential, commercial,
and light industry.
Industry
Low Voltage
This product fulfils the requirements for the EC directive 73/23/EEC on "low
Directive
voltage" and was tested to EN60950.
Declaration of
The EC declarations of conformity and the documentation relating to this are
Conformity
available to the authorities concerned, according to the above EC directive,
Article 10 (1), from:
Observing the
The setup guidelines and notes on safety given in the documentation must be
Setup Guidelines
observed during startup and when operating the device.
Mouse Connection
The requirements regarding noise immunity (EN50082-2:1995) are met when
a mouse is connected at the COM2 port.
Note
Any other devices which are connected to this product must also be radio
interference suppressed according to the German Ministry for Post and
Telecommunications provision 1046/84 and 243/91 or European Economic
Community Directive 89/336/EEC. Products which fulfil these specifications
carry a manufacturer's certificate, the corresponding BZT (German
government body for telecommunications approvals) approval or the CE
symbol. Products which do not fulfil these requirements may only be
employed with special permission from the BZT.
PG 760 PII Product Information Bulletin
C79000-K7076-C767-01
Field of Application
Emitted Interference
EN 50081-1: 1992
EN 50081-2: 1993
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
A&D AS E14
Postfach 1963
D-92209 Amberg
Requirement For
Noise Immunity
EN 50082-1: 1992
--
13

Advertisement

loading