Advertisement
Options
Additional Disk
An optional second IDE disk drive can be built into the free rear disk drive
Drive
slot available. Provisions for the necessary wiring have already been made.
Caution
!
Risk of damage to the unit!
Please note that only qualified personnel should be allowed to work on the
open unit, so the warranty on the device is not affected. Authorized Siemens
maintenance and repair centers offer you a specialist maintenance service.
You can obtain a list of addresses from the SIMATIC Customer Support
Hotline. In addition, read Chapter 5 of the manual.
Authorized Types
Only ATA33-compatible drives can be used as a second disk drive. The
of Disk Drive
drives must display the CE- or UR- symbol. You can obtain further
information from your service representative.
Setting the Plug-in
On the rear of the disk drive there are plug-in jumpers to set the operating
Jumpers
mode. If there are jumper settings printed on your drive, these settings apply.
Additional
You can add to the functionality of your PG 760 PII by expanding the
Hardware
configuration of the hardware to fit your individual requirements. The
Expansions
following table shows the options offered by Siemens.
Please contact your Siemens sales representative for further options.
64 Mbytes memory expansion EDO
128 Mbytes memory expansion SDRAM
Mouse
MPI connecting cable for 12 Mbps
Caution
!
Risk of damage to the unit!
Please note that only qualified personnel should be allowed to work on the open
unit, so the warranty on the device is not affected. Authorized Siemens
maintenance and repair centers offer you a specialist maintenance service. You
can obtain a list of addresses from the SIMATIC Customer Support Hotline. In
addition, read Chapter 5 of the manual.
PG 760 PII Product Information Bulletin
C79000-K7076-C767-01
Option
6ES7791-0FR00-0XA0
6ES7791-0GS00-0XA0
Use a robustly designed industrial mouse
e.g. DURAPOINT at the COM2 (V24)
port for industrial applications.
6ES7901-4B00-0XA0
Order Number
15
Advertisement
