Advertisement
Installing SIMM
Plug the SIMM memory cards in as follows:
Cards
1. Switch off your device and disconnect it from the power supply.
2. First open the unit as described in Chapter 4 of the manual.
3. Remove all inserted long ISA modules.
4. Plug the SIMM card into the socket in a vertical position, making sure the
5. Press the card lightly and tilt it downwards until it locks into place.
6. Close the device (see Chapter 4 of the manual).
Caution
!
Risk of damage!
After plugging in, make sure that the cards fit tightly into their sockets other-
wise they could be damaged.
16
cut-out on the connector end of the SIMM card engages properly.
PG 760 PII Product Information Bulletin
C79000-K7076-C767-01
Advertisement
