Advertisement
Safety Guidelines
This product information bulletin contains notices which you should observe to ensure your own
personal safety, as well as to protect the product and connected equipment. These notices are
highlighted in the manual by a warning triangle and are marked as follows according to the level
of danger:
Warning
!
indicates that death, severe personal injury or substantial property damage can result if proper
precautions are not taken.
Caution
!
indicates that minor personal injury or property damage can result if proper precautions are not
taken.
Note
draws your attention to particularly important information on the product, handling the product, or
to a particular part of the documentation.
Correct Usage
Please observe the following:
Note
You can set up and operate your programming device in conjunction with the following instructions.
You should only connect external devices and work with memory cards in conjunction with the
PG 760 PII manual.
Only qualified personnel should be allowed to install and work on this equipment using the
PG 760 PII manual. Qualified persons are defined as persons who are authorized to commission,
to ground, and to tag equipment, systems, and circuits in accordance with established safety
practices and standards.
Warning
!
This device may only be used for the applications described in the catalog or technical description,
and only in connection with devices or components from other manufacturers which have been
approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored and set up carefully and
correctly, and operated and maintained as recommended.
Trademarks
SIMATIC , SIMATIC NET and SIMATIC HMI are registered trademarks of SIEMENS AG.
The reproduction, transmission or use of this document or its contents is
not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights created by
patent grant or registration of a utility model or design, are reserved.
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschaeftsgebiet Industrie-Automatisierungssysteme
Postfach 4848, D-90327 Nuernberg
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be precluded
entirely, we cannot guarantee full agreement. However, the data in this
manual are reviewed regularly and any necessary corrections included in
subsequent editions. Suggestions for improvement are welcomed.
Technical data subject to change.
Advertisement
