Advertisement
Caution
!
Risk of loss of data and damage to drive!
Drives are sensitive to vibrations and shock. Any vibrations occurring during
operation can lead to the loss of data or damage to the drive.
If you intend transporting the unit, switch it off, and wait until the drive has
come to rest (about 20 seconds) before you move it.
CD-ROM drive
The CD-ROM drive allows you to load programs and data from CDs. The CD-
ROM drive also enables you to easily update the already installed SIMATIC
software and Windows 95. The CD-ROM drive is connected to the secondary
IDE interface.
Part Names and
Functions
1
Phones Jack
This jack is used to connect a set of headphones. Please use headphones with a
stereo mini-jack plug.
2
Volume Control
This control is used to adjust the headphone volume. This control has no effect
on the left and right audio outputs from the LINE OUT connector on the back
of the unit.
3
BUSY Indicator
This indicator lights while data is being read.
4
CD Tray
This tray prevents dust from getting inside the CD-ROM reader and should
remain closed. If your programming device is not switched on you can manually
push the tray and close the door of your CD-ROM drive.
5
Emergency
Use a paper clip or any other device to open the CD-ROM tray if the electrical
Eject Hole
eject is disabled by software or if power failure occurs (See "Emergency Eject"
for details).
6
Open/
This button is pressed to open or close the CD tray when the power of your
Close Button
programming device is on.
8
1
2
3
4
5
6
PG 760 PII Product Information Bulletin
C79000-K7076-C767-01
Advertisement
