Advertisement
Setting Up and Transporting the PG 760 PII
Unpacking the
Unpack your PG 760 PII programming device as follows:
PG 760 PII
1. Remove the packing.
2. Do no throw the original packing away. Keep it in case you have to
3. Check with the packing list to make sure no components are missing.
4. Please keep the documentation in a safe place. It contains important
5. Check the packing and its contents for any shipping or transport damage.
6. Please inform your local dealer of any shipping or transport damages and
Caution
!
Risk of mechanical damage!
When transporting your PG 760 PII in cold weather when it may be exposed
to extreme variations in temperature, make sure that no moisture or
condensation can form on or in the unit.
The unit should be allowed to reach room temperature slowly before it is started
up. If condensation has formed, the unit should be left for about 12 hours before
being switched on.
Fill the serial number of your programming device in the table below. If your
device has been stolen and repair work is required the repair and maintenance
centers can only identify it by its serial number.
Serial number PG 760 PII
Setting up your
Setting up the tower:
PG 760 PII
Proceed as follows:
1. Place your programming device on a horizontal and even surface.
2. Place monitor, keyboard and mouse in the most convenient position.
3. Connect monitor, keyboard and mouse.
Transport
Despite the fact that the PG 760 PII is of rugged design, its internal
components are sensitive to severe vibrations or shock. You must therefore
protect your PG 760 PII against severe mechanical stressing when
transporting it. Use the original packing material if you have to ship the PG
from one location to another.
PG 760 PII Product Information Bulletin
C79000-K7076-C767-01
transport the unit again sometime in the future.
information on the operation of your programming device.
and of outstanding items indicated on the packing list.
Don't cover the ventilating slots.
1
Advertisement
