Removing The Fan Board Tray; Installing The Fan Board Tray - Dell EMC PowerEdge T550 Installation And Service Manual

7. FAN_SIG2
9. FAN6
11. FAN5

Removing the fan board tray

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove the air shroud.
4. Remove the cooling fan cage.
5. Disconnect the cables that are connected to the fan board.
Steps
1. Loosen the captive screw and slide the fan board tray to the right of the system to disengage it from the chassis.
2. Lift the fan board tray out of the system.
Figure 40. Removing the fan board tray
Next steps
Replace the fan board tray.

Installing the fan board tray

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove the air shroud.
4. Remove the cooling fan cage.
5. Disconnect the cables that are connected to the fan board.
8. FAN_SIG1
10. FAN_PWR
Safety instructions.
Before working inside your
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 51