Recommended Tools; Optional Front Bezel; Removing The Front Bezel - Dell EMC PowerEdge T550 Installation And Service Manual

Recommended tools

You need the following tools to perform the removal and installation procedures:
● Key to the bezel lock. The key is required only if your system includes a bezel.
● Phillips 1 screwdriver
● Phillips 2 screwdriver
● Torx T30 screwdriver
● 5 mm hex nut screwdriver
● Plastic scribe
● 1/4-inch flat blade screwdriver
● Wrist grounding strap connected to the ground
● ESD mat
● Needle-nose pliers

Optional front bezel

NOTE: LCD panel is optional on the front bezel. If the front bezel has an LCD panel, see

Removing the front bezel

Prerequisites
1. Follow the safety guidelines listed in
2. Keep the bezel key handy.
NOTE: The bezel key is part of the LCD bezel package.
Steps
1. Unlock the bezel.
2. Pull the top end of the bezel away from the system.
3. Unhook the bezel tabs from the slots at the bottom of the system, and lift the bezel away.
36 Installing and removing system components
Safety instructions.
LCD panel section.