Figure 121. Installing the internal USB module
Next steps
1.
Install the internal USB
2.
Install the air
shroud.
3. Follow the procedure listed in
Internal USB memory key
Removing the internal USB memory key
Prerequisites
CAUTION:
To avoid interference with other components in the server, the maximum permissible dimensions of
the USB memory key are 15.9 mm width x 57.15 mm length x 7.9 mm height.
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
Steps
Remove the USB memory key from the internal USB port.
Figure 122. Removing the internal USB memory key
Next steps
Replace the internal USB memory
Installing the internal USB memory key
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
Steps
Connect the USB memory key into the internal USB port.
key.
After working inside your
Safety
instructions.
Before working inside your
key.
Safety
instructions.
Before working inside your
system.
system.
system.
Installing and removing system components
119