Optional Gpu Card; Removing The Gpu Card - Dell EMC PowerEdge T550 Installation And Service Manual

Figure 133. Installing the GPU card holder
Next steps
1. Install the air shroud.
2. Follow the procedure listed in

Optional GPU card

Removing the GPU card

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove the air shroud.
NOTE: The GPU card images below are representative and may not match the actual GPU card to remove.
Steps
1. Remove the screws securing the GPU card.
2. Hold the GPU card by the edges, and pull the card until the card edge connector disengages from the connector on the
expansion card slot.
132 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your
system.
system.