Installing The System Cover - Dell EMC PowerEdge T550 Installation And Service Manual

Figure 31. Removing the system cover
Next steps
Replace the system cover.

Installing the system cover

Prerequisites
Follow the safety guidelines listed in
NOTE: Ensure that all internal cables are connected and placed out of the way and no tools or extra parts are left inside the
system.
Steps
1. Align the tabs on the system cover with the guide slots on the system and slide the system cover.
2. Close the system cover release latch.
NOTE: Ensure that the system cover closes without obstruction or unnecessary force. Reseat any cables or
components or realign the system cover if necessary.
3. Using a 1/4-inch flat head or Phillips 2 screwdriver, rotate the lock clockwise to the lock position.
Safety instructions.
Installing and removing system components 43