Figure 95. Removing the optical drive
Next steps
Replace the optical drive
Installing the optical drive
Prerequisites
NOTE:
Only slim 9.5-mm SATA DVD-ROM drive or DVD+/-RW drive can be installed in your system. External optical drives
can be connected through USB ports.
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. If installed,
remove the front
Steps
1. Align the optical drive with the slot on the system.
2. Slide the optical drive into the slot until the release tab clicks into place.
100
Installing and removing system components
or
install the optical drive
Safety
instructions.
Before working inside your
bezel.
blank.
system.