Removing The Thermal-Cooling Assembly; Prerequisites; Procedure - Dell Inspiron 14 3452 Service Manual

Removing the thermal-cooling
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery.
2 Remove the
3 Follow the procedure from step 1 to step 3 in
4 Remove the
5 Remove the
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 8 in
8 Follow the procedure from step 1 to step 6 in
board".

Procedure

1 In sequential order (as indicated on the thermal-cooling assembly),
loosen the captive screws that secure the thermal-cooling assembly to
the system board.
2 Disconnect the fan cable from the system board.
60
computer. After working inside your
base cover.
memory modules.
wireless card.
After working inside your
"Removing the hard
"Removing the palm
"Removing the system
drive".
rest".