Pad Removal & Laundering; Cup Holder Attachment And Removal; Pool Noodle Or Rolled Towel Use - Baby Trend PROtect Series Owner's Manual

1. Removal: Remove the upper seat back by
lifting the release tab and pulling up on the
upper seat back.
NOTE: DO NOT store the upper seat back in
the passenger compartment. Store the upper
seat back in a secure location like your trunk
or garage.
2. Installation: Align the upper seat back rods
and push rods into the openings until you
hear the seat back lock into place. Pull up on
the upper seat back to ensure the removable
upper seat back is locked in position.
5.16 Pad Removal & Laundering
Pad Removal
1. Unfasten the 4 elastic loops located on the
bottom of the Convertible. And unfasten the
8 snaps located on the edge of the pad.
2. Lift the seatback flap.
3. Remove the upper seat back.
4. Unfasten 4 snaps and remove the upper
seat pad.
To Launder
1. Hand wash in cool water with mild detergent
and hang to dry.
NOTE: DO NOT Machine wash or dry
in dryer.
47
5.0 Installation and Use
Copyright © 2018, Baby Trend, Inc.
5.0 Installation and Use

5.17 Cup Holder Attachment and Removal

Cup Holder Attachment
1. Align the cup holder slot with the connector
on the armrest of the car seat and push
inward until it snaps into place.
Cup Holder Removal
1. Press the release button at the bottom of the
cup holder upward and pull the cup.

5.18 Pool Noodle or Rolled Towel Use

Extra Elevation
1. A pool noodle or rolled towel can be used for
extra elevation.
2. Place the noodle or rolled towel where the
seat bottom and seat back meet.
Copyright © 2018, Baby Trend, Inc.
2.
48