Disconnecting All Devices; Setting Indoor Location; Viewing Detected Beacons - Motorola MTP6650 Feature User Manual

2 Select Setup→Bluetooth→My Received Files.
A list of all files received appears.
3 Press the Menu key.
4 Select one of the following options:
• Details – Displays details of the file: name, size, reception date and time.
• Forward – Sends the selected file to another Bluetooth-enabled device. To send the file,
highlight the recipient device and press Select.
• Delete – Deletes the selected file.
4.6.6

Disconnecting All Devices

When and where to use:To disconnect all remote devices connected to your radio.
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth→Disconnect All.
All devices are disconnected.
NOTE: To disconnect only one device, from the home screen, select
Menu→Bluetooth→Devices, highlight the required device, and press Disconnect.
4.6.7

Setting Indoor Location

NOTE: Your service provider can enable this feature.
Indoor Location is used to track radio location while the radio is indoors. When Indoor Location is
activated, your radio receives beacon information from various dedicated beacons within the range
of the radio. The radio then sends the information within a Location Information Protocol message to
the Switching and Management Infrastructure, and a mapping application decodes the information to
calculate the location of the radio.
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth→Indoor Location.
3 Select Change.
4 Select On or Off to activate or deactivate Indoor Location.
Your radio is now able to detect Bluetooth location beacons when Indoor Location is activated.
NOTE: The use of the Indoor Location feature may have a negligible impact on other Bluetooth
functions on your radio.
4.6.7.1

Viewing Detected Beacons

Prerequisites:Turn on Indoor Location. If Indoor Location is turned off, the screen displays Service
Restricted.
MN005826A01-AE
Chapter 4 : Main Menu
95