MN005826A01-AE
Chapter 3 : Modes
Figure 6: Communication through Repeaters
When the radio detects a potential repeater signal or connects to a repeater, it plays a tone,
displays the Repeater available message, and shows an appropriate icon. When the radio loses
connection with the repeater, it plays a tone, displays the Repeater not available message, and
the repeater icon is blinking.
3.3.11
Communication Through Gateways
Gateway provides connectivity between radios operating in Direct Mode Operation (DMO) and the
TETRA network, so that the DMO radios can communicate with the Trunked Mode Operation (TMO)
radios.
Figure 7: Communication Through Gateways
Radio behavior when radio detects a potential repeater signal or connects to a gateway:
•
A tone is sound.
•
Gateway available message is displayed.
•
An appropriate icon is shown.
58
DMO
TMO
DMO
TMO
DMO