Adjusting The Volume Of The Radio From Bluetooth Audio Device; Clearing All Bluetooth Devices Information; Responder Alert Sensors - Motorola APX 8000XE User Manual

MN002667A01-AR
Chapter 6: Advanced Features
6.19.7

Adjusting the Volume of the Radio from Bluetooth Audio Device

Prerequisites:Ensure that the Bluetooth audio device is connected to the radio.
When and where to use:
Your radio can only control the volume of MCW and OCW Bluetooth enabled audio device. If the radio
is paired with other Bluetooth enabled audio device, its volume is independent from the APX radio. In
this case, the volume is only adjustable on the device.
Procedure:
Adjust volume up/down on the Bluetooth audio device.
The radio display shows VOL XX and sounds a short, medium-pitched tone.
6.19.8

Clearing All Bluetooth Devices Information

Procedure:
• Clearing all Bluetooth devices information using the preprogrammed Bluetooth On/Off button:
a. Long press the preprogrammed Bluetooth On/Off button.
You hear a short, medium-pitched tone. The display shows PLS WAIT to indicate clearing is
in progress.
If successful, the display shows ALL CLR.
If unsuccessful, the radio sounds a short, low-pitched tone.The display shows CLR FAIL.
Postrequisites:
NOTICE: If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys
on all previously paired devices as well. (Please see your accessories manual for further
details.)
6.19.9

Responder Alert Sensors

Responder alert sensors allow the radio to send an over-the-air (OTA) notification when the radio
receives the holster, weapon fired, and vest pierced sensor events.
To enable the feature, ensure that the GPS, Enhanced Data, and Bluetooth feature of your radio is on
and the radio supports Bluetooth Low Energy (BTLE).
You can disable the feature temporarily or permanently. This feature allows you to prevent one or all
events from being reported OTA.
This feature is enabled through Customer Programming Software (CPS) configuration. Contact your
system administrator for more information.
NOTICE: The radio reports the next event after the preprogrammed 15-second timer expires.
Any consecutive event occurring within the timer is not reported to avoid multiple reports over
the same incident.
64