Home Mode Display Text Message; Individual Call; Private Call; Making Private Calls - Motorola MTP6650 Feature User Manual

Table of Contents

Advertisement

MN005826A01-AE
Chapter 5 : Features
-
20 m for 50% of location reports.
-
50 m for 95% of location reports.
NOTE:
The presented values depend on variety of factors, for example the view on the sky. To
optimize the GPS performance the radio should have the clearest possible view of the open
sky.
The use of the high capacity battery is recommended, especially when high accuracy mode is
used.
5.8

Home Mode Display Text Message

Your radio is provided with a feature that allows your service provider to send special text messages
to the display. The message is limited to 24 characters. The message stays on the home screen until
a new home mode display message is received. Power cycle your radio to replace the Home Display
message to the predefined one.
5.9

Individual Call

Individual call is a point-to-point call between two TETRA radios.
The available individual calls are:

Private Call

Phone Call
Private Automatic Branch Exchange (PABX) Call
5.9.1
Private Call
Private call, also called point-to-point call, enables communication between two individuals. No other
radio can hear the conversation.
This call type can be carried out in two ways:
Duplex Call
This call type is only allowed in Trunked Mode Operation (TMO). During this call, both parties can
speak at the same time.
Simplex Call
Available in TMO or Direct Mode Operation (DMO). Only one party can speak at a time.
5.9.1.1

Making Private Calls

Procedure:
1 From the home screen, enter a number.
2 If Private is not the first type of call presented, select it by repeatedly pressing Ctype.
3 If the Private Call Hook Customization feature is enabled, press Menu→Hook Method and
select the required hook method for simplex and duplex calls.
4 Press Done.
5 Use one of the following options:
150

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents