Statutory Guarantee; Limitations Of The Manufacturer's Liability; Characteristics Of The User; Technical Assistance - Jøtul PF 710 Installation, Operation And Maintenance Manual

ENGLISH
- EN 61000-3-3:2014 /EC:2016
- EN 55014-2:2015
EMF:
- EN 62233:2008 / EC:2008
LVD:
- EN 60335-1:2013 /EC:2014 /A11:2015 /A13:2017
- EN 60335-2-102:2007 /A1:2011
CPR:
- EN 14785:2006
1�8 STATUTORY GUARANTEE
For a user to be able to take advantage of the legal
guarantee as per Directive 1999/44/EC, they must
scrupulously abide by the guidelines given in this
instruction manual, and must, in particular:
• Always work according to the instruction manual.
• Make sure that the necessary maintenance work
is always performed according to the installation,
operation and maintenance manual provided by the
manufacturer.
• The stove should be operated only by persons having the
required knowledge about stove operation, according
to the instruction manual provided.
Failure to adhere to guidelines concerning the
requirements given in this instruction manual immediately
voids the guarantee.
1�9 LIMITATIONS OF THE
MANUFACTURER'S LIABILITY
The manufacturer is released from any civil or penal
liability, directly or indirectly, in the following cases:
• The installation is non-compliant with this instruction
manual as well as with standards and regulations
applicable in the country where the stove is installed.
• No maintenance by the user or a fitter.
• Failure to adhere to the instructions given in this
manual.
• Installation performed by persons not licensed for
installation with the Jøtul certificate.
• Use inconsistent with safety guidelines.
• Modifications or repairs carried out without the
manufacturer's consent.
• Use of spare parts that are not original for the given
stove model.
• Unforeseen events.
1�10 CHARACTERISTICS OF THE USER
The user of the stove must be a responsible adult, having
the technical knowledge indispensable for performance of
routine maintenance activities with regard to mechanical
and electrical components of the equipment
The user must ensure that no children are present near
the stove while it is working�
1�11 TECHNICAL ASSISTANCE
The JØTUL technical service will provide assistance in
solving any problems related to use and maintenance
throughout the stove's entire life cycle.
JØTUL remains at the user's full disposal and can provide
the address of the nearest authorised dealer.
1�12 SPARE PARTS
Only original spare parts may be used.
Parts replacement cannot be postponed until components
undergo total wear.
Replacement of a part prior to its total wear helps to
prevent sudden failures that may cause property damage
or physical injury.
The maintenance checks listed in the "Maintenance"
section must be conducted at regular intervals of time.
4
1�13 RATING PLATE
The rating plate is situated on the rear of the stove and
contains all product data, including the manufacturer's
reference number, registration number and markings
1�14 DELIVERY OF THE STOVE
The stove is delivered in a cardboard box and fixed on a
wooden pallet enabling its transport by means of a forklift
and/or other means.
The following components are found inside the stove:
• installation, operation and maintenance manual;
• remote control pilot (only for models with a remote
control pilot);
• tool for opening the ash pan (only for models requiring
such a tool).

2 SAFETY GUIDELINES

2�1 WARNINGS FOR THE INSTALLER
Observe the prescriptions contained in this manual.
The instructions for assembly and disassembly of the
appliance are reserved for specialist technicians only�
The installation, use and maintenance of the product must
be in accordance with the manufacturer's instructions
and in compliance with the regulations. Failure to comply
with the instructions and any incorrect operations may
give rise to hazardous situations, damage to property,
animals, health problems or malfunctioning.
Installation, electrical connection, operational testing
and maintenance must be carried out exclusively by
authorised and qualified personnel.
The installation and maintenance of the product must be
carried out exclusively by qualified personnel with suitable
knowledge of the product itself. Use only original spare
parts recommended by the manufacturer.
Responsibility for the works carried out in the location
of the appliance is, and remains, with the user; the latter
is also responsible for carrying out the checks relating to
the proposed installation solutions.
The installer must comply with all local, national and
European safety regulations.
The appliance must be installed on floors with adequate
load bearing capacity.
Check that the chimney flue and air inlet set-ups conform
to the type of installation�
Do not carry out on-the-fly electrical connections with
temporary or uninsulated cables.
Check that the earthing of the electrical system is
efficient.
Before starting the assembly or disassembly phases
of the appliance, the installer must observe the safety
precautions required by law and the following indications
in particular:
• do not operate in adverse conditions;
• they must operate in perfect psychophysical conditions
and must check that the personal protective equipment
is intact and functioning perfectly;
• they must wear gloves and safety shoes;
• they must use tools with electrical insulation;
• they must make sure that the area used during
assembly/dismantling is free from obstacles.
The product must only be installed in rooms that are not
at risk of fire and equipped with all the necessary services
including air and electrical supplies and flue gas exhausts.
Evaluate the static conditions of the surface bearing the
weight of the product and provide suitable insulation if it
is composed of flammable materials (e.g. wood, carpet,
plastic). Live electrical parts: power the product only once
it has been completely assembled.
.