Statutory Guarantee; Limitations Of The Manufacturer's Liability; Characteristics Of The User; Technical Assistance - Jøtul PF 621 S Installation, Operation And Maintenance Manual

ENGLISH
1�8 STATUTORY GUARANTEE
For a user to be able to take advantage of the legal
guarantee as per Directive 1999/44/EC, they must
scrupulously abide by the guidelines given in this
instruction manual, and must, in particular:
• Always work according to the instruction manual.
• Make sure that the necessary maintenance work
is always performed according to the installation,
operation and maintenance manual provided by the
manufacturer.
• The stove should be operated only by persons having the
required knowledge about stove operation, according
to the instruction manual provided.
Failure to adhere to guidelines concerning the
requirements given in this instruction manual immediately
voids the guarantee.
1�9 LIMITATIONS OF THE
MANUFACTURER'S LIABILITY
The manufacturer is released from any civil or penal
liability, directly or indirectly, in the following cases:
• The installation is non-compliant with this instruction
manual as well as with standards and regulations
applicable in the country where the stove is installed.
• No maintenance by the user or a fitter.
• Failure to adhere to the instructions given in this
manual.
• Installation performed by persons not licensed for
installation with the Jøtul certificate.
• Use inconsistent with safety guidelines.
• Modifications or repairs carried out without the
manufacturer's consent.
• Use of spare parts that are not original for the given
stove model.
• Unforeseen events.
1�10 CHARACTERISTICS OF THE USER
The user of the stove must be a responsible adult, having
the technical knowledge indispensable for performance of
routine maintenance activities with regard to mechanical
and electrical components of the equipment
The user must ensure that no children are present near
the stove while it is working�
1�11 TECHNICAL ASSISTANCE
The JØTUL technical service will provide assistance in
solving any problems related to use and maintenance
throughout the stove's entire life cycle.
JØTUL remains at the user's full disposal and can provide
the address of the nearest authorised dealer.
1�12 SPARE PARTS
Only original spare parts may be used.
Parts replacement cannot be postponed until components
undergo total wear.
Replacement of a part prior to its total wear helps to
prevent sudden failures that may cause property damage
or physical injury.
The maintenance checks listed in the "Maintenance"
section must be conducted at regular intervals of time.
4
1�13 RATING PLATE
The rating plate is situated on the rear of the stove and
contains all product data, including the manufacturer's
reference number, registration number and markings
1�14 DELIVERY OF THE STOVE
The stove is delivered in a cardboard box and fixed on a
wooden pallet enabling its transport by means of a forklift
and/or other means.
The following components are found inside the stove:
• installation, operation and maintenance manual;
• remote control pilot (only for models with a remote
control pilot);
• tool for opening the ash pan (only for models requiring
such a tool).

2 SAFETY GUIDELINES

2�1 GUIDELINES FOR THE FITTER
Proceed according to the guidelines given in this manual.
Stove installation and uninstallation instructions are
available only for professional, authorised fitters.
In the situation where the fitter encounters a problem
that they are unable to solve, contact the Technical
Department at Jøtul.
Liability for works related to the stove rests solely with the
fitter. The fitter is responsible for conducting technical
inspection and providing consulting with regard to the
proper installation solutions.
The fitter must adhere to all local, domestic and European
safety regulations, particularly DTU 24-1 and 24-2.
The equipment must be installed on a base with sufficient
load-bearing capacity, appropriate to the stove's weight.
Check whether the intake of combustion air is configured
accordingly to the type of installation.
Do not make electrical connections using uninsulated
jumper cables or temporary cables.
Check whether the electrical system is properly grounded.
Prior to commencement of stove installation or
uninstallation, the fitter must adhere to the safety
measures required by legal regulations, particularly by the
legal framework of the labour code..
Check whether the prepared flue duct and air inlet are
compliant with the instruction manual provided�
2�2 RECOMMENDATIONS FOR PERSONS
RESPONSIBLE FOR MAINTENANCE
• Proceed according to the description given in manual�
• Always use the appropriate safety measures and other
protection equipment�
• Prior to any maintenance works, make sure that the
stove is completely cold, if it has just been in use�
• In the case where even one protective device is not
working, the stove must be recognised as unserviceable�
• Prior to commencement of works on electrical and
electronic connectors inside the equipment, remove
the power plug from its socket�
.