Specifications - Follett HCE/HME700A Operation And Service Manua

Specifications

Electrical
Each ice machine requires its own separate circuit with electrical disconnect within 10 ft (6m).
Equipment ground required.
Standard electrical: HCE/HME700: 230/50/1 (6 ft (2m) cord
Maximum ice machine fuse: 15A each
Amperage: 7A
Plumbing
3/8" OD push-in water inlet
3/4" MPT drain
1/4" FPT condenser inlet (water-cooled condenser only)
1/4" FPT condenser drain (water-cooled condenser only)
Notes:
3/4" vented drain line must slope a minimum of 1/4" per foot (6mm per 30.4 cm run).
Drain to be hard piped and insulated.
To prevent back flow, do not connect drains.
Separate drains for ice machine and condenser.
Water shut-off recommended within 10 feet (3 m).
Water supply must be treated by a scale-inhibiting filter (Follett item# 00130286).
Ambient
Air temperature
Water temperature
Water pressure – potable
Note: Water-cooled condenser pressure 150 psi (1034 kPa)
Heat rejection
Air-cooled rejects 8850 BTU/hr
Water-cooled rejects 10150 BTU/hr
Ice production
Note: Water regulating valve set to maintain a 215 PSIG (95°F Saturated R404A) discharge pressure at all
conditions.
Air-cooled ice machine capacity/24 hrs.
Ambient Air Temperature F/C
F 60 70 80 90 100
C 16 21 27 32 38
50 651 600 571 518 460
10 295 272 259 235 209
620 574 531 492 443
60
281 260 280 223 201
16
572 479
70 538 506 416
217
21 259 244 230 189
80 569 519 493 452 415
27 258 235 224 205 188
90 537 504 471 430 389
244 229 214 195 176
32
100 F/38 C max.
90 F/32 C max.
70 psi max. (483 kPa)
Water-cooled ice machine capacity/24 hrs.
Ambient Air Temperature F/C
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
F 60 70 80 90
C 16 21 27 32
50 608 600 592 583 lbs
276 272 269 264 kg
10
578 571 567 548 lbs
60
262
16 259 257 249 kg
528
70 554 540 537 lbs
21 251 245 244 239 kg
80 530 521 514 489 lbs
27 240 236 233 222 kg
515 512 508 484 lbs
90
234 232 230 220 kg
32
5
50 F/10 C min.
45 F/7 C min.
10 psi min. (89 kPa)