Husqvarna K1270 Workshop Manual page 9

CLUTCH DRUM BEARING
K1260
Needle bearing
K1270
Two ball bearings
DISMANTLING THE BLADE GUARD
K1260
First dismantle the arbor bushing.
Then dismantel the flange washer, the dust protec-
tion and finally the three screws and the plate.
K1270
First dismantle the belt guard and the front pulley.
Then dismantle the four screws and the springs.
CLUTCH FOR K1260 AND K1270
DISMANTLING THE BLADE GUARD FOR K1260 AND K1270
Technical data
9
English -