Starter
8. STARTER
8.1. REPLACING THE STARTER CORD
Dismantle the starter.
8.2. ELIMINATE THE SPRING FORCE
FROM THE RETURN SPRING
1. Pull out the starter cord approximately 12 in./30
cm. Hold the starter pulley with your thumb
and place the cord in the cut-out on the starter
pulley.
2. Let the starter pulley rotate slowly and wind up
the cord on the metal sleeve.
3. Lift off the cord from the starter pulley.
26
- English
REPLACING THE STARTER CORD STEP 1
REPLACING THE STARTER CORD STEP 2
REPLACING THE STARTER CORD STEP3