Husqvarna K1270 Workshop Manual page 12

Engine special tools
12
- English
503 55 22-01
Sealing plug
Replaces the decompres-
sion valve.
• Leakage testing the
crankcase.
504 91 40-01
Puller
• Dismantling the crank-
shaft's sealing rings in
the crankcase.
502 50 52-01
Assembly wedge
• Installation of the crank-
shaft sealing ring on the
clutch side.
502 50 82-01
Assembly punch
• Assembly of the crank-
shaft's sealing rings in
the crankcase.
504 90 90-02
Universal puller
• Dismantling the clutch's
support washer on the
crank shaft.
• Splitting the crankcase, in
combination with 544 06
00-02.
544 06 00-02
Grip plate
• Splitting the crankcase, in
combination with 504 90
90-02.
531 00 48-67
Bearing puller
• Dismantling the main
bearing from the crank-
shaft.
544 10 36-02
Bearing press
• Dismantling the main
bearing.
• Assembly of the crank-
shaft.
• Assembly of the clutch's
support washer on the
crank shaft.
506 37 61-02
Bearing press
• Main bearing assembly.
• Dismantling and assem-
bly of blade shaft bearing
and axle.
575 96 20-01
Pressing device
• Dismantling and as-
sembling of blade shaft
bearings and axle.
502 50 66-02
U-Key
• Removal and fitting of
vibration dampers.
502 50 83-01
"Hose catcher"
Tool for catching the fuel
hose in the tank and
drawing out the fuel filter for
servicing.
• Fuel filter and hose.
501 60 02-03
Special screwdriver for
the idle screw
• Adjustment of the idle
speed.