Husqvarna K1270 Workshop Manual page 19

7.2. STARTER
1. Loosen the 4 screws on the guard.
2. Dismantle the starter.
7.3. CUTTING HEAD
1. Loosen the screws on the cutting head.
2. Slacken off the belt tension using the adjuster
screw. Dismantle the screws on the cutting
head.
3. Loosen the hose clip, see: 20.4. Hose clips on
page 75.
4. Dismantle the front belt cover by pushing it
forward.
Dismantling into basic modules
DISMANTLE STARTER
DISMANTLE CUTTINGHEAD STEP 1-2
DISMANTLE CUTTINGHEAD STEP 3
DISMANTLE CUTTINGHEAD STEP 4
2
1
19
English -