Lexmark MX721 User Manual page 88

Understanding the printer menus
Menu item
Device Operations
Minimum Copy Memory
20 MB*
30 MB
50 MB
80 MB
100 MB
Device Operations
Clear Custom Status
Device Operations
Clear all remotely‑installed messages
Device Operations
Automatically Display Error Screens
Off
On*
Device Operations
Honor orientation on fast path copy
Off*
On
App Configuration
LES Applications
Off
On*
Scanner Configuration
Scanner Manual Registration
Print Quick Test
Scanner Configuration
Scanner Manual Registration
Front ADF Registration
Rear ADF Registration
Flatbed Registration
Scanner Configuration
Reset Maintenance Counter
Resetting ADF Maintenance Counter
Scanner Configuration
Edge Erase
Flatbed Edge Erase (3*)
ADF Edge Erase (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the minimum memory allocation for storing copy jobs.
Erase user‑defined strings for the Default or Alternate custom
messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time equal
to the Screen Timeout setting.
Enable the printer to use the orientation setting under the Copy
menu when sending quick copy jobs.
Enable the Lexmark Embedded Solutions (LES) applications.
Notes:
•
When set to On, this setting does not affect built‑in
applications.
•
This menu item appears only in the Embedded Web
Server.
Print a Quick Test target page.
Note: Make sure that the margin spacing on the target page
is uniform all the way around the target. If it is not, then the
printer margins must be reset.
Manually register the flatbed and ADF after replacing the ADF,
scanner glass, or controller board.
Reset the counter after replacing the ADF maintenance kit.
Set the size, in millimeters, of the no‑print area around an ADF
or flatbed scan job.
88