Lexmark MX721 User Manual page 131

Understanding the printer menus
Admin Controls
Menu item
Text Default
5–95 (75*)
Text/Photo Default
5–95 (75*)
Photo Default
5–95 (50*)
Use Multi‑Page TIFF
Off
On*
TIFF Compression
LZW*
JPEG
Transmission Log
Print Log*
Do Not Print Log
Print Only For Error
Log Paper Source
Tray [x] (1*)
Multipurpose Feeder
Custom Job Scanning
Off*
On
Scan Preview
Off
On*
Allow Save as Shortcut
Off
On*
Adjust ADF Skew
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Flash Drive Print
Menu item
Number of Copies
1–9999 (1*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the quality of text on the scanned image.
Set the quality of text and photo on the scanned image.
Set the quality of a photo on the scanned image.
Enable scanning of multiple TIFF images in one TIFF file.
Specify the compression type for TIFF files.
Print a log for successful FTP scan transmission.
Specify the paper source for printing FTP logs.
Set the printer to scan the first set of original documents using the specified
settings, and then scan the next set with the same or different settings.
Note: This menu item appears only when a hard disk is installed.
Show a scan preview of the original document.
Note: This menu item appears only when a hard disk is installed.
Save custom FTP settings as shortcuts.
Set the printer to adjust the skewed images from documents that are scanned
from the ADF.
Description
Set the number of copies.
131