Lexmark MX721 User Manual page 103

Understanding the printer menus
Menu item
Staple
Off*
1 staple, top left corner
2 staples, left
1 staple, top right corner
2 staples, top
1 staple, bottom left corner
2 staples, bottom
1 staple, bottom right corner
2 staples, right
Punch
Off*
2 holes
3 holes
"Copy from" Size
"Copy to" Source
Tray [x] (1*)
Multipurpose Feeder
Auto Size Match
Darkness
1 to 9 (5*)
Number of Copies
1–9999 (1*)
Header/Footer
Left Header
Middle Header
Right Header
Left Footer
Middle Footer
Right Footer
Overlay
Confidential
Copy
Draft
Urgent
Custom
Off*
Custom overlay
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the staple position for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Set the punch mode for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Set the paper size of the original document.
Note: Letter is the U.S. factory default setting. A4 is the international factory
default setting.
Specify the paper source for the copy job.
Adjust the darkness of the scanned image.
Specify the number of copies.
Specify the header or footer information on the scanned image.
Specify the overlay text to print on each copy.
Type the text for the Custom choice in Overlay menu.
103