Dos User - Planet KVM-U201 User Manual

2.3 DOS User

If the motherboard BIOS "USB Controller" and "USB Keyboard
Support" are disable and you apply USB KVM Switch to PC. The PC
will not work in DOS mode. Please connect PS/2 keyboard to the
PS/2 port of PC for enabling "USB Controller" and "USB Keyboard
Support" in BIOS.
Different motherboard BIOS has different set up procedure. Here
are some examples, which based on some kind of BIOS version,
below for the user reference.
A. AWARD BIOS: To press "Del" key immediately for a
couple of times when powering on PC and you will get
into BIOS set up mode à
USB Legacy support à Select "AUTO" à Save and quit
BIOS set up.
B. PHOENIX BIOS à To press "F2" after powering on PC
gets into BIOS set up mode à Select "Advanced" item à
Legacy USB support à Select "Enable" à Save and quit
BIOS set up.
C. AMI BIOS à To press "Del" key immediately for a couple
of times when powering on PC and you will get into
BIOS set up mode à Select "Chipset features setup"
à USB controller à all USB port USB KB/Mouse à
KEYB+MOUSE à Save and quit BIOS set up.
*: MAC and Sun Micro Systems has the similar installa-
tion like mentioned above PC installation process.
The console ports of USB KVM switch just support PS/2 keyboard
and PS/2 Mouse. So, please don't use USB keyboard to the USB
KVM Switch to control it.
Note: When finishing to install the PC systems with this
USB KVM Switch, there is only one of the PCs can
get keyboard and mouse to work.
10
Select "Advanced" item à