Speed Dial; Assign A Speed Dial Entry - Uniden AT4801 User Manual

Telephone operation

Speed dial

This console has 32 speed dial locations where you
can store and dial phone numbers or system extension
numbers. You can store up to 32 digits in each location.
You can access the first 16 locations using only the
speed dial keys. To access the remaining 16 locations,
press LOWER and then the speed dial key for the
desired location. You might wish to write the names,
telephone numbers, or extension numbers of the speed
dial entries on the directory card, using the light gray
spaces for the upper 16 locations and the white spaces
for the lower 16 locations.
NOTE: By default, pressing speed dial keys 1 to 10 will make an intercom call to the
corresponding registered extension, as shown on the directory card.

Assign a speed dial entry

You can assign speed dial entries to dial a number in directory or call an
extension. If you add a new phone number, it will also be saved to directory.
To copy an entry from directory or select an extension:
1. When the console is idle, press MENU/
2. Press or
3. The screen displays Speed dial: Press a speed dial key to edit.
4. Press the desired speed dial key, or press LOWER followed by the desired
speed dial key, then press
5. Press or
SELECT or /SKIP.
MENU/
6. Press or
SELECT or /SKIP to save the setting and return to the
7. Press
MENU/
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
to scroll to Speed dial, then press
MENU/
to choose Add from DIR or Call extension, then press
to choose a desired entry.
.
SELECT
SELECT.
62
SELECT or /SKIP.
MENU/