IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, these basic safety precautions should always be followed to reduced the risk of fire, electrical shock, and injury: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3.
YOUR FP103 PACKAGE Your FP103 package will contain: 0 2 - 9 5 9 9 - 3 6 7 5 12:15 down h o l d hold dial pqrs store cancel mode redial (pause) 1 - Base Unit, Handset and Curly Cord...
Caller ID Insert ‘0’ On/Off On some telephone networks, to correctly display and dial Caller ID telephone numbers, a ’0’ may need to be inserted. When the power is first connected to the FP103 For Caller ID to operate you ‘0’...
LOCATION OF CONTROLS & CONNECTIONS Handset and Base Unit Handset cord connection Rear of Base Unit AC adaptor Telephone Line 0 2 - 9 5 9 9 - 3 6 7 5 new call 12:15 20/06 CALL callback delete down mute f l as h h o l d...
You do not need to hang up the phone. Music on Hold When a call is on hold, the FP103 will play a popular melody to reassure your caller that the call has not been disconnected.
MEMORY DIAL NUMBERS Twelve, speed dial, numbers can be programmed into the memory of your telephone. Each memory location can store a maximum of 16 digits. Storing Two-Touch Speed Dial Numbers An example: You want to be able to speed dial Fred. To program FRED (telephone number 09 273 8383) as a speed dial number follow these steps: 1.
Dialling Speed Dial Numbers There are two different ways to dial a stored two-touch number: 1. a. Pick up the handset and press the dial button. b. Press the desired memory location button, either -or- 2. a. Don’t pick up the handset - press the dial button. b.
USING CALLER ID 50 Memory Caller ID When you use this telephone with the Caller ID service, you will see the number of the calling party (unless the call is blocked or is from a silent number) before you answer the phone. This telephone will store and For caller ID features to display information about the last 50 calls received.
Deleting a Call from the Call History To delete a call from the call history: 1. Use the up or down buttons until the screen displays the information you wish to delete. 2. Press the delete button once and the screen will display 3.
DISPLAY INFORMATION Display Messages: on the screen means - PRIVATE • The caller has chosen to block their number. • A call from an old type of telephone network exchange. • A call from a silent number subscriber. • A call from any analogue cellular mobile telephone. P R I VAT E 12:15 01:08...
You can store 20 sets of Caller IDs as VIP callers. You can store any Caller ID record into the VIP Call List and the telephone will sound a special VIP ring tone (3 different VIP tones are available) to alert you to an incoming VIP call. NOTE VIP Alert On/Off 1.
Press the reset button to clear all memory Call Waiting (flash) does not work Check the flash time is set correctly for your country Please refer to our website for further information and frequently asked questions. New Zealand - www.uniden.co.nz Australia - www.uniden.com.au...