Related Manuals for Uniden 2315+2
Summary of Contents for Uniden 2315+2
-
Page 1: Quick Start
UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM Page a WDECT 2315 Wide Band Digital Technology provides the clearest sound Quick Start and the best privacy. Guide... -
Page 2: Installation & Safety
UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM INSTALLATION & SAFETY Choosing the best location for your phone. When choosing a location for your phone there are a number of appliances the phone should not be near, and areas you should avoid. AVOID - Television sets and other electronic... -
Page 3: Quick Start Guide
To DC IN 9V To telephone socket New Zealand To TEL LINE Australia Telephone line cord Make sure the AC Adapter/s remains switched ON at all times. Use only the Uniden AC Adapter/s supplied with this unit. [ ii ]... - Page 4 RED and BLACK dots on the phone case for first time. the plug to fit properly. Press firmly until it clicks • Use only the Uniden into place. rechargeable battery pack (BT-446) 3) Securely close the battery compartment cover by sliding it supplied with your up until it snaps into place.
- Page 5 UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM Charging the handset(s) 1) Place the handset(s) in the main base unit or charging cradle with the keypad facing forward. 2) Make sure the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.
-
Page 6: Table Of Contents
12/22/05 3:25 PM CONTENTS INSTALLATION & SAFETY QUICK START GUIDE CONTENTS GETTING STARTED Controls and Functions Uniden Company Philosophy Welcome Features Checking the Package Contents Terminology Mounting the Base Unit on a Wall Battery Maintenance Installing the Beltclip Headset Installation... -
Page 7: Getting Started
UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM CONTROLS AND FUNCTIONS Page 1 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. Hands-Free Speaker 5. Handset Battery Compartment 6. New Message LED 7. Handset Earpiece 8. LCD Display /del Key /vol/ a. - Page 8 UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM Main Base 23. Base Antenna 24. Base Charging Contacts 25. charge LED 27. TEL LINE Jack 28. DC IN 9V Jack [ 2 ] Page 2 Charger Base 29. Charging Contacts 30. charge LED 31.
-
Page 9: Uniden Company Philosophy
To bring outstanding wireless communication products to people’s lives throughout the world. WELCOME Congratulations on your purchase of the Uniden Multi-Handset Cordless System telephone. This unit is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 4 handsets. -
Page 10: Features
UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM FEATURES Great features of this cordless phone include: • Designed and Engineered in Japan • Wide Band Digital Technology • Multi (4) Handset Capable • Digital Duplex Speakerphone on Handset Advanced Alpha Display Caller ID Features: •... -
Page 11: Checking The Package Contents
UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM CHECKING THE PACKAGE CONTENTS Make sure you have received the following items in the package. If any of these items are missing or damaged, contact your retailer. • Base unit (1) • Handset (3) •... -
Page 12: Mounting The Base Unit On A Wall
UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM MOUNTING THE BASE UNIT ON A WALL You can mount your base directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. -
Page 13: Battery Maintenance
UP409ZH (WDECT2315-2) OM 12/22/05 3:25 PM Page 7 BATTERY MAINTENANCE Battery use time (per charge) Fully charged • Up to 7 hours continuous use. • Up to 10 days when the handset is in the standby mode (up to 15 hours when in DirectLink mode) Recharge your phone on a regular basis by returning the handset to the charger after each phone call. -
Page 14: Installing The Beltclip
Do not remove or damage the battery casing. • To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. INSTALLING THE BELTCLIP To attach the beltclip Insert the beltclip into the holes on each side of the handset. -
Page 15: Headset Installation
3:26 PM HEADSET INSTALLATION Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. Headset is available through Uniden authorized retailers. -
Page 16: About The Menu Options
UP409ZH (WDECT2315-2) OM 12/22/05 3:26 PM ABOUT THE MENU OPTIONS There are 5 main menu options, (DirectLink Mode, Room Monitor, Handset Setup, Global Setup and System Reset) and submenu options. Summary of the Main Menu and Submenu During Global Setup and System Reset, make sure your Two Way Communication between the Handsets Anywhere without... - Page 17 UP409ZH (WDECT2315-2) OM 12/22/05 3:26 PM Handset Setup The following submenu options must be set separately for each handset. Submenu name Edit Voice Mail Program or delete the voice mail access number (see page 14). Ringer Tones Adjusting the ringer tone (tone your phone makes when ringing) (Default is Flicker) (see page 15).
-
Page 18: System Reset
UP409ZH (WDECT2315-2) OM 12/22/05 3:26 PM Global Setup If you change one of the Global settings, you change the setting for all additional handsets. Only one handset can change Global settings at a time. Submenu name Day & time Name Tag (POP ID) (Default is on) Insert 0 Dial Mode... -
Page 19: Setting Up The Menu
UP409ZH (WDECT2315-2) OM 12/22/05 3:26 PM SETTING UP THE MENU Entering the Menu 1) Press the /del key in standby mode. 2) Use /vol/ /vol/ to move the pointer to a desired main menu (DirectLink Mode, Room Monitor, Handset Setup, Global Setup, and System Reset). 3) Press to select the desired main menu. - Page 20 UP409ZH (WDECT2315-2) OM 12/22/05 3:26 PM Room Monitor Using Room Monitor 1) Enter the Room Monitor menu (see “Entering the Menu” on page 13). This is an example, if 2) Select the handset you want to monitor by using you have handset #1 /vol/ and #2.
- Page 21 UP409ZH (WDECT2315-2) OM 12/22/05 3:26 PM Selecting a Ringer Tone 1) Enter the Handset Setup menu, and then the Ringer Tones submenu (see “Entering the Menu” on page 13). There are 10 ringer tones or 10 Polyphonic Tones to choose from. - Ringers [Flicker, Clatter, Soft Alert, Wake Up, Light Bug, Beep Boop, Tone Board, Chip Chop, Party Clap, Reminder] - Polyphonic Tones [Beethoven’s Symphony #9 (Beethoven9), For Elise (Elise), We...
- Page 22 UP409ZH (WDECT2315-2) OM 12/22/05 3:26 PM Setting the Anykey Answer 1) Enter the Handset Setup menu, and then the Anykey Answer submenu (see “Entering the Menu” on page 13). 2) Press /vol/ 3) Press Setting the True Banner 1) Enter the Handset Setup menu, and then the Banner submenu (see “Entering the Menu”...
- Page 23 UP409ZH (WDECT2315-2) OM 12/22/05 3:26 PM Global Setup Setting Name Tag (POP ID) 1) Enter the Global Setup menu, and then the Name Tag submenu (see “Entering the Menu” on page 13). 2) Press /vol/ /vol/ to change the selection, 3) Press .
- Page 24 UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM Setting the Dial Mode (Australia only) 1) Enter the Global Setup menu, and then the Dial Mode submenu (see “Entering the Menu” on page 13). 2) Press /vol/ select, 3) Press Copy Phonebook 1) Enter the Global Setup menu, and then the Copy Phonebook submenu (see “Entering the Menu”...
- Page 25 UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM System Reset De-register the Handset 1) Enter the System Reset menu, and then the Deregister HS submenu (see “Entering the Menu” on page 13). 2) Press /vol/ /vol/ to select the handset ID to be de-registered from the list, and then press appears.
-
Page 26: Basics
UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM MAKING AND RECEIVING CALLS This handset has a built-in speakerphone that allows you to have a hands-free conversation. This feature allows you to communicate easily while performing other • To set Autotalk, see tasks, such as cooking. page 15 or to set Anykey Answer see You can easily switch a call from normal conversation to hands-free conversation. -
Page 27: Keypad Lock
UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM KEYPAD LOCK The Keypad Lock prevent user from pressing the keypad accidentally. You can still answer calls, and receive page and phonebook locations, and the keypad lock is reactivated after the operation. To lock the keypad Press and hold until you hear a confirmation tone. -
Page 28: Redialing A Call
UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM REDIALING A CALL The last three phone numbers dialed can be quickly redialed. Redialing from Standby Mode • If the number 1) Press exceeds 32 digits, only the first 32 2) Press digits are retained in redial/pause will display one of the last three redial memory. -
Page 29: Adjusting The Handset Ringer, Earpiece And Speaker Volume
UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM ADJUSTING THE HANDSET RINGER, EARPIECE AND SPEAKER VOLUME Handset ringer volume Press the volume up key or volume down key (labeled as /vol/ /vol/ in standby mode to select one of three ringer volume (off, low, or high). Earpiece and speaker volume Pressing the volume up key or volume down key (labeled as /vol/... -
Page 30: Mute Microphone
UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM MUTE MICROPHONE You can temporarily turn off the microphone so that the person you are talking with cannot hear you. 1) Press 2) Press /vol/ when Mute is set to on, TONE DIALING SWITCH-OVER (AUSTRALIA ONLY) Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). -
Page 31: Clarity Booster
UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM CLARITY BOOSTER If you encounter interference while using your phone, you can manually improve the sound by setting the Clarity Booster to on. This works only when the phone is in use. 1) Press /del during talk time (while phone is in use). -
Page 32: Find Handset
UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM FIND HANDSET To locate the handset, press when the base is in standby mode. All registered handsets If the battery pack is beeps for 60 seconds, and “ completely drained, handset display. To cancel paging, press any key on the the handset will not handset or beep when paging. -
Page 33: Using One Touch Voice Mail Access
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM USING ONE TOUCH VOICE MAIL ACCESS If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The new message LED flashes whenever you have messages waiting in your voice mailbox. -
Page 34: Phonebook
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM PHONEBOOK The Phonebook allows you to dial a number using just a few key presses. Your phone stores names/numbers in the phonebook memory location, and you can search names in • Your phone has 100 alphabetical order. - Page 35 UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM appears. Press /vol/ to move the pointer to one of the Distinctive Ring options, and then press If you choose not to store a Distinctive Ring, simply select the “No Selectn” option. appears. Press /vol/ to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0).
-
Page 36: Steps For Entering Names And Special Characters
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM Page 30 STEPS FOR ENTERING NAMES AND SPECIAL CHARACTERS Refer to the letters on the number keys to select the desired characters. With each press of a number key ( ), the displayed character appears in the following order: upper case letters first, lower case letters next and finally the number corresponding to the key. - Page 37 UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM If you make a mistake while entering a name to move the cursor to the incorrect character. Press /del to erase the wrong character and then enter the correct character. To delete all characters, press and hold For example, to enter Movies: 1) When the phone is in standby mode, press 2) Press...
-
Page 38: Viewing The Phonebook
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM VIEWING THE PHONEBOOK Your phone stores names/numbers in the phonebook memory locations, and you can search names in alphabetical order. You can view the phonebook even while the phone is in use. 1) Press If you recall the phonebook during a call, 2) Press /vol/... -
Page 39: Making Calls Using The Phonebook
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM MAKING CALLS USING THE PHONEBOOK From Standby Mode 1) When the phone is in standby mode, view the phonebook location to dial (see “Viewing the Phonebook” on page 32). 2) Press speaker. The displayed number is dialed. -
Page 40: Editing Or Erasing A Stored Name, Phone Number, Distinctive Ring, And Speed Dial
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM EDITING OR ERASING A STORED NAME, PHONE NUMBER, DISTINCTIVE RING, AND SPEED DIAL 1) When the phone is in standby mode, press 2) Press /vol/ keypad to view the phonebook locations (see “Viewing the Phonebook” on page 32). a. -
Page 41: Chain Dialing
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM Page 35 CHAIN DIALING The memory locations in the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits), that you need to enter once your call connects. -
Page 42: Caller Id
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM CALLER ID You must subscribe to Caller ID services through your local telephone provider to use these features. • If you answer a call When the telephone rings, the Caller ID feature allows you to view the caller’s name, and before the Caller ID phone number along with the date and time of call. -
Page 43: Viewing The Caller Id List
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM 2) When you pick up the phone, the display changes to (AutoTalk feature is set to on). Data errors appear as “ ”. VIEWING THE CALLER ID LIST The Caller ID list stores information for incoming calls - even unanswered calls. You can store 100 of the Caller ID messages and Phonebook locations (including SpeedDials) in total. -
Page 44: Deleting A Caller Id Message
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM DELETING A CALLER ID MESSAGE Deleting Information from the Caller ID List 1) When the phone is in standby mode, view the Caller • Once the Caller ID ID information to be deleted (see “Viewing the Caller data has been deleted, the ID List”... -
Page 45: Using The Caller Id Message List
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM USING THE CALLER ID MESSAGE LIST Calling a party from the Caller ID list From Standby mode 1) When the phone is in standby mode, view the Caller ID message (see “Viewing the Caller ID List” on page 37). 2) Press speaker. -
Page 46: Expanding Your Phone
UP409ZH (WDECT2315-2) OM 12/22/05 3:28 PM EXPANDING YOUR PHONE 4 Multi-Handset Expendability Your phone supports up to 4 handsets (including the handset(s) supplied with your • To use the phone). You can now place a fully-featured cordless handset anywhere AC power is WDECT2305, register it available to connect the handset charger. -
Page 47: Register The Handset
UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM REGISTER THE HANDSET If you purchase an extra handset, you need to register the handset to the base before use. Only one handset can be registered at a time. The handset ID for the supplied handset(s) was assigned at the factory, which has #1 or #2 in the display (#2 for models that have two handsets in packaging). -
Page 48: Using Two Way Communication Between The Handsets Anywhere Without The Base (Directlink)
UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM USING TWO WAY COMMUNICATION BETWEEN THE HANDSETS ANYWHERE WITHOUT THE BASE (DIRECTLINK) To use this feature, you must enter the two Two handsets can be handsets into the DirectLink mode first. in Direct Link mode while other handsets To enter the DirectLink mode are in use. -
Page 49: 3-Way Conferencing
UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM 3-WAY CONFERENCING The phone permits 3-way conversations between 2 handsets, and an outside line. 1) During a call, press on another handset to initiate the 3-way conversation. 2) To remove either caller from your conversation, press The other handset will still be connected to the call. -
Page 50: Replacing The Base
(s) and base identification numbers. To do this, select For model number verification, visit “System Reset” from handsets display menu option list (see page 19 for guidance). our website www.uniden.com.au or www.uniden.co.nz [ 44 ] Page 44 /transfer/int’com. speaker on the initiating handset. , or on the initiating handset, and press . -
Page 51: Additional Information
UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM CHANGING THE DIGITAL SECURITY CODE The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. -
Page 52: Note On Power Sources
Warning To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. • Use only the specified Uniden battery pack (BT-446). -
Page 53: Troubleshooting
UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM TROUBLESHOOTING If your phone is not performing to your expectations, please try these simple steps first. Symptom The charge LED won’t illuminate • Make sure the AC adapter is plugged into the base and wall outlet. when the handset is placed in •... - Page 54 • Make sure that the receiving handset is not in use. call with other handset. If you still have a problem. • Check our web site for the latest information and frequently asked questions. www.uniden.com.au www.uniden.co.nz [ 48 ] Page 48 Suggestion...
-
Page 55: Index
UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM INDEX 0 - 9 3-way conferencing ...43 20 ring options ...15 Anykey answer...16 AutoTalk ...15 Banner ...16 Battery Preparing and charging ...iii Replacement and handling ...46 Beltclip ...8 Booster ...25 Caller ID Caller ID service ...36 Calling ...39 Call Waiting ...26 Deleting ...38... -
Page 56: Warranty
(C) Improperly installed, (D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as part of a system not manufactured by Uniden. - Page 57 UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM Page 51 NOTE [ 51 ]...
- Page 58 UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM Page 52 NOTE [ 52 ]...
- Page 59 UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM Page 53 NOTE [ 53 ]...
- Page 60 Place this handset and charger in any convenient location, no need for an extra phone jack! Another innovation from Uniden, the company that bring outstanding wireless communication products to people's lives throughout the world.