Options During A Conference Call - Uniden AT4801 User Manual

Operation
Conference call
Establish a conference call (Continued)
3. Press CONFERENCE at any time to begin the conference call.
4. If necessary, repeat step 2 (make another outside call) and step 3 above
to invite another external party to join the conference until the maximum
capacity is reached.
NOTES:
• After a conference call is established, other extensions are not allowed to actively barge-in the
conference in progress.
• The flash signal in a dialing sequence is not available during a conference call.
• The system does not support an internal conference of more than two system extensions.

Options during a conference call

To talk privately with one external party:
Press LINE 1-LINE 4 to talk privately with the person on that line. The
1.
intercom call is automatically placed on hold.
2. Press CONFERENCE to resume the conference call.
To talk privately with one internal party:
Press INTERCOM to talk privately with the person on that extension. The
1.
external line(s) is/are automatically placed on hold.
Press CONFERENCE to resume the conference call.
2.
To drop an outside line:
ress MENU
1. Press
/SELECT
2. Press or
want to drop. Press
To drop an intercom call:
Press INTERCOM to activate the intercom call that you want to drop.
1.
The external line(s) is/are automatically placed on hold. Place the corded
handset on the console or press SPEAKER
If there is only one external line on hold, press LINE 1-LINE 4 to resume the
2.
external call and lift the corded handset on the console. If there are multiple
external lines on hold, press CONFERENCE to resume the conference call.
To end a conference call:
• Place the corded handset on the console or press SPEAKER
does not terminate until all parties hang up.
twice to choose End line.
to choose End Line X (X represents the line number that you
SELECT or /SKIP to confirm.
MENU/
to confirm.
.
55
. The call