Regency Panorama P33CE Owners & Installation Manual page 47

Zero clearance direct vent gas fireplace
Hide thumbs Also See for Panorama P33CE:
Table of Contents

Advertisement

P33
8. Install Log D - the wider end will rest on the left edge of the burner
tray and the narrower end will rest on Log C
C
D
Log D position
9. Install Log E - rest one end on Log C and the opposite end on the far
right grate tab on the burner.
Log E - placement
919-884
E
2
11. Final install.
A
D
C
Final install
12. Pull off ember size pieces of rock wool and gently place them on the
front of the burner tray in the places shown in the photo below. Do
not compress the rock wool, leave it loose.
Separate platinum embers and place them on the front of the burner
on and around the rock wool.
13. Test fi re to ensure proper light off (make sure fl ame fl ows smoothly
from one end of burner to the other). If there is any fl ame hesita-
tion, check that area for any burner ports blockage.
E
B
P33CE-11 Direct Vent Gas Fireplace
|
47
07.19.18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Panorama 3ce-ng11Panorama 3ce-lp11

Table of Contents