Programming Karaoke Songs (Karaoke Program Playback) - JVC UX-GN9V Instructions Manual

Enjoying karaoke (Only for countries/areas other than Australia) (continued)
Programming karaoke songs
(Karaoke program playback)
You can program songs to be played back in the
desired order. A maximum of 12 songs can be pro-
grammed.
This function is available when a loaded disc is
selected as the source.
■When a microphone is connected and a
disc is stopped
1
Press [RESERVE] while holding
down [SHIFT].
• The program screen appears on the TV
screen.
Program screen (TV screen)
2
Press the number buttons to pro-
gram songs.
3
Press [DVD/CD 6] to start play-
back.
• The program screen disappears and play-
back starts in the programmed order.
4
Sing into the microphone.
NOTE
• You can activate and deactivate the karaoke
program by pressing [RESERVE] repeatedly
while holding down [SHIFT].
55
For the locations of the remote
control buttons, refer to page 52.
Checking the program
Press [RESERVE] while holding down
[SHIFT].
• The program screen appears on the TV screen.
Canceling a programmed song
Press [CANCEL].
• To cancel the remaining tracks, press [CANCEL]
repeatedly.