JVC UX-GN9V Instructions Manual page 52

Listening to sounds using Bluetooth
7
Press  or  repeatedly to select
the desired device.
• Each time you press  or , the name of
the Bluetooth device that the main unit has
discovered second or later appears respec-
tively.
8
Press [ENTER/SET].
9
Use the number buttons and  or
 to enter the passkey of the
selected Bluetooth device.
• For the passkey, refer to the operation man-
ual of the Bluetooth device.
10
Press [ENTER/SET].
• When the paring procedure is properly com-
pleted, "SUCCESS" appears in the display
window on the main unit.
NOTE
• You can pair up to 5 receiving Bluetooth devices
such as headphones (and up to other 5 transmit-
ting Bluetooth devices such as audio players,
mobile phones and computers). If you pair a
sixth device, the first paired device is replaced.
• Only one device can be connected to the system
at a time. To select a Bluetooth device, refer to
page 50.
• If "CANNOT" and "CONNECT" flash in the dis-
play window, the connection between this sys-
tem and the Bluetooth device has failed. At this
time, (1) try repeating step 2 and then (2) press
[Bluetooth SETTING] repeatedly while holding
down [SHIFT] to select "SEND" in the display
window.
Listening to sounds played back on
the main unit from a Bluetooth device
1
Connect a Bluetooth USB adaptor.
• Refer to page 47.
2
Press [DVD/CD > 6 ], [USB1 6],
[USB2 6] or [TUNER/AUDIO IN]
to select a source other than "BT"
(Bluetooth) in the display window.
49
®
technology (continued)
3
Operate the desired Bluetooth
device so that it can receive the
signals from this system.
• For details on the setting, refer to the opera-
• Set the volume of the Bluetooth to the mini-
4
Hold down [Bluetooth 6] for 2 or
more seconds.
• The built-in transmitter of the main unit is
5
Press [DVD/CD 6], [USB1 6],
[USB2 6] or [TUNER/AUDIO IN]
to start playback on the main unit.
• To listen to sound from an external device
6
Adjust the volume on the Blue-
tooth device.
NOTE
• When the Bluetooth device is compatible with
the AVRCP profile, you can operate some func-
tions of this system using the Bluetooth device.
The controllable functions may include playback,
pause, stop and skip.
• To quit producing sound played back on the
main unit from the Bluetooth device, hold down
[Bluetooth 6] for 2 or more seconds. "BT
OFF" appears in the display window, and sound
is produced from the speakers of this system.
• When using a Bluetooth device as the source,
select "BT OFF" .
• To turn off the signals from the Bluetooth device,
refer to page 50.
• The sound mode function does not affect the
sound produced from the Bluetooth device.
(Refer to page 13.)
tion manual for the Bluetooth device.
mum.
activated, and the main unit starts searching
for Bluetooth devices.
connected to the [AUDIO IN] terminal, also
start playback on the device.