Creating A New Group; Moving A Track; Deleting A Track/Group From A Usb Device - JVC UX-GN9V Instructions Manual

Recording sound to a USB device (continued)

Creating a new group

1
Connect the USB device to the
[USB2 AUDIO REC/PLAY] terminal.
• Refer to page 21.
2
Press [USB2 6].
3
Press 7 to stop playback.
4
Press [TITLE/EDIT] repeatedly to
select "FORM GR" in the display
window.
5
Enter a title.
• Refer to "Entering a title" on page 44.
6
Press [ENTER/SET].

Moving a track

■When the track you want to move is played
back
1
Press [TITLE/EDIT] repeatedly to
select "MOVE TR" in the display
window, and then press [ENTER/
SET].
2
Press 4 or ¢ to select the
desired track, and then press
[ENTER/SET].
3
Press [GROUP/TITLE SKIP]
repeatedly while holding down
[SHIFT] to select the destination
group, and then press [ENTER/
SET].
4
Press 4 or ¢ to select a new
track number, and then press
[ENTER/SET].
5
Press [ENTER/SET] to start mov-
ing the track.
45
For the locations of the remote
control buttons, refer to page 39.
Deleting a track/group from a
USB device
1
Connect a USB device to the
[USB2 AUDIO REC/PLAY] terminal.
• Refer to page 21.
2
Press [USB2 6].
3
Press 7 to stop playback.
4
Press [TITLE/EDIT] repeatedly to
select "TR DEL" or "GR DEL" in
the display window.
• Select "TR DEL" to delete a track.
• Select "GR DEL" to delete a group.
5
Press [ENTER/SET].
6
Use [GROUP/TITLE SKIP], 4 or
¢ to select the desired track/
group.
• To select a group, press [GROUP/TITLE
SKIP] repeatedly while holding down
[SHIFT].
• To select a track, press 4 or ¢ repeat-
edly.
7
Press [ENTER/SET].
• To cancel deleting the track/group, press 7.
8
Press [ENTER/SET].
Deleting all tracks/groups
This function deletes not only sound tracks and
groups but also the other data from a USB device.
1
Instead of step 4, press [TITLE/
EDIT] repeatedly to select "FOR-
MAT" in the display window.
2
Press [ENTER/SET] 3 times.
• Each time you press [ENTER/SET], the dis-
play changes as confirmation proceeds.