Connecting The Power Cable; Disabling The Demonstration Display - JVC UX-GN9V Instructions Manual

Preparation (continued)

Connecting the power cable

AC outlet
• Connect the power cable after you complete the
other connections.
• The [STANDBY] lamp on the main unit lights up.
11
Do not connect the power cable until all other connections have been made.
Main unit
(rear view)
Disabling the demonstration
display
When you connect the power cable into the AC out-
let, the demonstration display automatically starts in
the display window. Before using this system, turn
off the demonstration display.
■When the main unit is turned off
Hold down [DEMO] on the main unit
until "DEMO CLR" appears.
Main unit (front view)