JVC UX-GN9V Instructions Manual page 69

■For a wirelessly connected Bluetooth device
Problem
Sound of the desired
Bluetooth device is not
produced from the
speakers of this system.
Sound of this system is
not produced from the
desired Bluetooth
device.
A Bluetooth device can-
not be connected to this
system.
The sound quality is
poor.
The Bluetooth connec-
tion is unstable.
■Radio broadcast
Problem
A radio broadcast has
interference from noise.
A radio broadcast can-
not be received.
Possible cause
When the "Bluetooth" indicator
is on, another device is con-
nected to this system.
When the "Bluetooth" indicator
is flashing, the connection has
failed.
When the "Bluetooth" indicator
is off, the Bluetooth USB adap-
tor is not connected properly or
"BT" (Bluetooth) is not selected
as the source.
When the "Bluetooth" indicator
is on, another device is con-
nected to this system.
When the "Bluetooth" indicator
is flashing, the connection has
failed.
When the "Bluetooth" indicator
is off, the Bluetooth USB adap-
tor is not connected properly or
the built-in transmitter of the
main unit is not activated.
This system is not ready to be
connected.
The desired Bluetooth device is
not ready to be connected.
An incorrect passkey is
entered.
"NORMAL" is selected for "SND
QLTY" (sound quality).
"HIGH" is selected for "SND
QLTY".
A wireless LAN or a microwave
oven is interfering with the con-
nection.
Possible cause
The antennas are not con-
nected correctly.
Possible solution
Change the connected Bluetooth
device.
Try establishing a connection
again.
Connect the Bluetooth USB adap-
tor properly or select "BT" in the
display window.
Change the connected Bluetooth
device.
Try establishing a connection
again.
Connect the Bluetooth USB adap-
tor properly or activate the built-in
transmitter.
Operate this system so it is ready
to connect.
Operate the Bluetooth device so it
is ready to connect, referring to the
operation manual for the Bluetooth
device.
Enter the correct passkey, refer-
ring to the operation manual for
the Bluetooth device.
Change the setting to "HIGH".
Change the setting to "NORMAL".
Stop the wireless LAN or micro-
wave oven.
Possible solution
Connect the antennas correctly.
(Continued on the next page)
Reference
page
50
47-48
47-48
50
48-49
48-49
47-49
47-49
47-49
51
51
–
Reference
page
6
66