Stopping Playback; Resuming Playback; Pausing Playback; Fast Reverse/Fast Forward Search - JVC UX-GN9V Instructions Manual

Stopping playback

■When a disc/file is played back
Press 7.

Resuming playback

When playback is stopped in the middle, playback
can be started from the stopped position.
Temporarily stopping playback
■When a disc/file is played back
Press 7 once.
• Playback stops, the "RESUME" indicator lights
up in the display window, and the position where
playback has been stopped is stored.
• If 7 is pressed twice, the stopped position is
cleared.
Starting playback from the stored
position
■When a disc/file is stopped in the middle
Press [DVD/CD 6], [USB1 6] or
[USB2 6].
NOTE
• You can deactivate the resume playback func-
tion. (Refer to "RESUME" on page 37.)
For the locations of the remote
control buttons, refer to page 20.

Pausing playback

■When a disc/file is played back
Press o r [DVD/CD 6], [USB1 6] or
[USB2 6].
• To return to normal playback, press [DVD/CD
6], [USB1 6] or [USB2 6] again.
Fast reverse/fast forward
search
■When a disc/file is played back
Press 1 or ¡.
• Each time you press 1 or ¡, the speed
increases.
• To restore the normal speed, press [DVD/CD
6], [USB1 6] or [USB2 6].
NOTE
• For some discs/files, sound is intermittent or no
sound is produced during fast reverse/fast for-
ward search.
• For a USB device connected to the [USB2
AUDIO REC/PLAY] terminal, the speed changes
to one of two levels.
• The selectable speeds and displays vary by the
disc/file type.
24