Preparation (continued)
Connecting an external
digital audio device
Main unit
(rear view)
Output
Optical digital cable
(not supplied)
To an optical digital
input terminal
Input
AV amplifier with
a built-in decoder
NOTE
• Before connecting or disconnecting an external
device, press [VOLUME ] repeatedly to set the
volume of this system to the minimum. You can
also use the [VOL –] control on the main unit.
• Select the appropriate setting for "DIGITAL
AUDIO OUTPUT" according to the connected
device. Refer to page 35.
• You can output the audio signal from the
[OPTICAL DIGITAL OUTPUT] terminal when
"DVD/CD" is selected as the source in the dis-
play window.
9
Do not connect the power cable until all other connections have been made.
Connecting a subwoofer
When you connect this system with an amplifier-
built-in subwoofer (not supplied), you can enjoy a
more dynamic bass sound. Refer to the manual of
the subwoofer for details.
Audio cable (not supplied)
(Use the audio cable supplied with
the amplifier-built-in subwoofer or
a commercially available cable.)
Amplifier-built-in subwoofer
(not supplied)
Connecting the power cable
AC outlet
• Connect the power cable after you complete the
other connections.
• The [STANDBY] lamp on the main unit lights up.
Main unit
(rear view)
Main unit
(rear view)