Fuel Gauge; Tachometer (If Equipped) - Subaru 2000 Legacy Owner's Manual

This meter displays the odometer and trip meter when the ignition switch
is in the "ON" position.
To change the mode indication, briefly push the knob.
The odometer shows the total distance that the vehicle has been driven.
The trip meter shows the distance that the vehicle has been driven since
you last set it to zero.
To set the trip meter to zero, select the indication of the trip meter by
pushing the knob and keep the knob pushed for more than 2 seconds.
NOTE
If the connection between the combination meter and battery is bro-
ken for any reason such as vehicle maintenance or fuse replace-
ment, the data recorded on the trip meter will be lost.
J Tachometer (if equipped)
CAUTION
Do not operate the engine with the pointer of the tachometer in
the red zone. In this range, fuel injection will be cut by the engine
control module to protect the engine from overrevving. The
engine will resume running normally after the engine speed is
reduced below the red zone.
The tachometer shows the engine speed in thousands of revolutions per
minute.
J Fuel gauge
The fuel gauge shows the approximate amount of fuel remaining in the
tank.
The gauge does not return to "E" even though the ignition switch is in the
"ACC" or "LOCK" position.
The gauge may move slightly during braking, turning or acceleration due
to fuel level movement in the tank.
3-8