Subaru 2000 Legacy Owner's Manual page 34

6. Unlock the seatback by pulling the release knob and fold the seat-
back down. Confirm that the pin located at the bottom of the seat
cushion is inserted into the slot at the top of the seatback.
7. Install the headrest (if so equipped) onto the backside of the seat-
back.
To return the rear seat to its original position, raise the seatback and seat
cushion until they lock into place and make sure that they are securely
locked.
Make sure that the rear seatbelts are not under the seat cushion or seat-
back.
Place the headrests (if so equipped) back in their normal position.
1-14
HB1027BA
HB1028BA