Subaru 2000 Legacy Owner's Manual page 104

B Arming the system
n To arm the system using remote transmitter
Press to
Arm the
system.
1. Close all windows and moonroofs (if so equipped).
2. Remove the key from the ignition switch.
3. Open the doors and get out of the vehicle.
4. Make sure that the engine hood (and the trunk lid) are locked.
5. Close all doors (and the rear gate on the station wagon).
6. Briefly press the "LOCK/ARM" button (for less than two seconds).
All doors (and the rear gate on the station wagon) will lock, the horn
will sound one time, the parking lights will flash one time and the indi-
cator light starts flashing slowly (approximately once every two
seconds).
If any of the doors, (rear gate or trunk lid) is not fully closed, the horn
sounds three times, the parking lights flash three times and the indi-
cator light flashes rapidly to alert you that the doors (or the rear gate)
are not properly closed. When you close the door, the system will au-
tomatically arm and doors will automatically lock.
2-14
Press to
Disarm the
system.
HB1000EB HB2033BB