Subaru 2000 Legacy Owner's Manual page 61

CAUTION
Be careful not to damage the belt webbing or hardware. Take care
that they do not get caught or pinched in the seatback.
The lap-shoulder belts of the built-in child restraint are equipped with an
automatic locking retractor (ALR) that automatically locks when both
tongue plates are latched into the belt buckle and the belts retract.
B Placing a child in the built-in child restraint
1. Before using the built-in child restraint, make sure the vehicle's rear
seatback is locked securely in place.
2. Lower the child restraint cushion.
3. Read the information and warnings on the child restraint cushion.
Check the child's size and weight to be sure the child is not too small
or too large for the child restraint.
Seat, seatbelt and SRS airbags
HBS048BB
– CONTINUED –
1-41