Subaru 2000 Legacy Owner's Manual page 27

NOTE
If the seatback is reclined rearward to the same level as the rear
seat cushion with the head restraint removed, a wide flat bed is
made available.
WARNING
D Never drive your car with the seats converted in a flat bed
position. If you do so, occupants will have a greater chance of
being injured even during simple deceleration, acceleration and
cornering since no firm restraint will be available for them.
D Before you lie on the flat bed to take a rest, read the descrip-
tion "Parking your vehicle" in Chapter 7 carefully and follow the
instructions.
1. Slide the front seat forward as far as possible.
2. Pull off the head restraint while pressing the release button.
3. Recline the seatback rearward up to the lowest position. Remem-
ber to reinstall the head restraint whenever the seatback is raised
back.
Seat, seatbelt and SRS airbags
– CONTINUED –
HBS011AA
1-7