Subaru 2000 Legacy Owner's Manual page 99

Hide thumbs Also See for 2000 Legacy:
Table of Contents

Advertisement

button. Unless a button on the remote is pressed, the alarm will be
deactivated after approximately 30 seconds.
B Selecting audible signal operation
Using the horn, the system will give you an audible signal when the
doors lock and unlock. If desired, you may turn the audible signal off.
To turn the audible signal off, simultaneously depress "LOCK/ARM"
and "UNLOCK/DISARM" buttons for more than two seconds. The horn
will sound two times to inform you that the audible signal has been
turned off.
To turn the audible signal on, simultaneously depress "LOCK/ARM"
and "UNLOCK/DISARM" buttons for more than two seconds. The horn
will sound one time to inform you that the audible signal has been
turned on.
B Replacing the battery
CAUTION
Do not let dust, oil or water get on or in the transmitter when
replacing the battery.
When the transmitter battery begins to get weak, transmitter range will
begin to decrease and the LED will not illuminate. Replace the battery
as soon as possible.
To replace the battery:
1. Remove the two screws on the back of the transmitter case by
HB1001BA
Keys and doors
Positive (+)
side facing up
HB1002BB
– CONTINUED –
2-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000 outback

Table of Contents