Subaru 2000 Legacy Owner's Manual page 163

4. Set the fan speed control dial to the highest speed.
NOTE
Warm air also comes out from the right and left air outlets. To
stop warm air flow from these outlets, turn the corresponding
thumb-wheel to the "
B Heating and defrosting
To direct warm air toward the floor and the windshield:
1. Set the air inlet selection button to the "OFF" position.
2. Set the air flow control dial to the "
3. Set the temperature control dial to the most comfortable level.
4. Set the fan speed control dial to the desired speed.
NOTE
Warm air also comes out from the right and left air outlets. To
stop warm air flow from these outlets, turn the corresponding
thumb-wheel to the "
" position.
" position.
" position.
Climate control
HB5012AA
– CONTINUED –
4-7